陈鹏;马国红;平奇文;沈旭;

• 1:南昌大学机电工程学院

摘要(Abstract)：

为研究DE-GMAW(双电极气体保护焊)焊接2 mm厚AZ31B镁合金板材时旁路电流对焊缝成型、焊缝显微组织和力学性能的影响,利用光学显微镜和X射线衍射分析技术(XRD)对接头的显微组织、相及相的成分进行分析,同时用维氏硬度试验计和万能试验机对焊接接头的显微硬度和抗拉强度分别进行测量。结果表明:焊缝区主要由α-Mg和β-Mg17Al12两种相组成;旁路电流为160 A时焊缝外观成型良好,没有焊接缺陷,焊缝质量高;随着旁路电流增加,熔宽基本保持不变,熔深逐渐减小,同时焊缝区晶粒尺寸逐渐减小;焊接接头显微硬度逐渐增大,接头抗拉强度呈先增大后减小的变化规律,在旁路电流为160 A时达到最大值。

关键词(KeyWords)： AZ31B镁合金;DE-GMAW;旁路电流;显微组织;力学性能

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(51665037;61165008)

作者(Author): 陈鹏;马国红;平奇文;沈旭;

Email:

DOI:

参考文献(References)：

• [1]ZHANG Z D,LIU L M,SHEN Y,et al.Mechanical properties and microstructures of a magnesium alloy gas tungsten arc welded with a cadmium chloride flux[J].Materials Characterization,2008,59:40-46.
• [2]SHEN Jun,WEN Libiao,LI Yang,et al.Effects of welding speed on the microstructures and mechanical properties of laser welded AZ61 magnesium alloy joints[J].Materials Science&Engineering A,2013,578:303.
• [3]于琨,黎文献,王日初,等.变形镁合金的研究、开发及应用[J].中国有色金属学报,2003,13(2):277-288.
• [4]孙德新,孙大千,李金宝,等.镁合金焊接技术的研究进展及应用[J].材料导报,2006,20(8):122-126.
• [5]ZHANG Z D,LIU L M,SONG G.Welding characteristics of AZ31B magnesium alloy using DC-PMIG welding[J].Transactions of Nonferrous Metals Society of China,2013,23:315-322.
• [6]MUNITZ A,COTLER C,STERN A,et al.Mechanical properties and microstructure of gas tungsten arc welded magnesium AZ91D plates[J].Materials Science and Engineering A,2001,302(1):68-73.
• [7]WAHBA M,MIZUTANI M,KAWAHITO Y,et al.Laser welding of die-cast AZ91D magnesium alloy[J].Materials and Design,2012,33:569-576.
• [8]SHUHEI Kanemaru,TOMOAKI Sasaki,TOYOYUKI Sato,et al.Study for TIG-MIG hybrid welding process[J].Weld World,2014,58:11-18.
• [9]ZHANG Y M,JIANG M,LU W.Double electrodes improve GM AW heat input control[J].Welding Journal,2004,83(11):39-41.
• [10]WEI H L,LI H,YANG L J,et al.Consumable double electrode with a single arc GMAW[J].International Journal of Advanced Manufacturing Technology,2013,68:1539.
• [11]WU C S,HU Z H,ZHONG L M.Prevention of humpingbead with high welding speed by double-electrode gas metal arc welding[J].International Journal of Advanced Manufacturing Technology,2012,63:573.
• [12]ZHANG Chaoyang,MA Guohong,NIE Jun,et al.Numerical simulation of AZ31B magnesium alloy in DE-GMAW welding process[J].International Journal of Advanced Manufacturing Technology,2015,78:1259-1264.
• [13]石玗,温俊霞,薛诚,等.DE-GMAW旁路电流对焊缝熔深变化的影响[J].兰州理工大学学报,2011,37(1):17-20.