AZ31B镁合金焊接技术研究现状及发展方向Research status and development tendency of welding technology of AZ31B magnesium alloy
刘奋军;王憨鹰;
摘要(Abstract):
分析镁合金的焊接特点,综述了近年来AZ31B镁合金的焊接方法,包括激光焊、钎焊、扩散焊、搅拌摩擦焊、TIG焊、电子束焊等,展望了AZ31B镁合金的焊接研究方向。
关键词(KeyWords): AZ31B镁合金;焊接技术;综述
基金项目(Foundation): 榆林学院高层次人才科研启动资金资助项目(12GK40)
作者(Author): 刘奋军;王憨鹰;
Email:
DOI: 10.14024/j.cnki.1004-244x.2013.05.050
参考文献(References):
- [1]陈振华.镁合金[M].北京:化学工业出版社,2004:19-22.
- [2]胡学安,徐道荣.镁合金的焊接方法及工艺要素[J].轻合金加工技术,2006,34(8):9-13.
- [3]冯吉才,王亚荣,张忠典.镁合金焊接技术的研究现状及应用[J].中国有色金属学报,2005,15(2):165-178.
- [4]孙德新,孙大千,李金宝,等.镁合金焊接技术的研究进展及应用[J].材料导报,2006,20(8):122-126.
- [5]高晨,李红,栗卓新.AZ31B镁合金超声振动钎焊接头微观结构和力学性能[J].焊接学报,2009,30(2):129-132.
- [6]马力,贺定勇.Zn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能[J].材料工程,2008(9):67-70.
- [7]Ma Li,Qiao Peixin,Long Weimin,et al.Interface characteris tics and mechanical properties of the induction brazed joint of magnesium alloy AZ31B with an Al based filler meta[lJ].Ma terials and Design,2012,37:465-469.
- [8]谭兵,王有祁,陈东高,等.AZ31B镁合金电子束焊接接头组织及性能分析[J].焊接学报,2008,29(9):75-78.
- [9]Chi Chaoting,Chao Chuenguang.Characterization on electron beam welds and parameters for AZ31B F extrusive plates[J].Journal of Materials Processing Technology,2007,182:369-373.
- [10]于思荣,陈显军,刘耀辉,等.AZ31B变形镁合金板材的TIG焊接[J].吉林大学学报:工学版,2009,39(1):159-163.
- [11]Babu N K,Cross C E.Grain refnement of AZ31 magnesium alloy weldments by AC pulsing technique[J].Metallurgical and Materials Transactions A,2012,43:4145-4154.
- [12]Padmanaban G,Balasubramanian V.Optimization of pulsed current gas tungsten arc welding process parameters to attain maximum tensile strength in AZ31B magnesium alloy[J].Trans Nonferrous Met Soc China,2011(21):467-476.
- [13]Padmanaban G,Balasubramanian V,Sarin Sundar J K.Inf uences of welding processes on microstructure,hardness,and tensile properties of AZ31B magnesium alloy[J].Journal of Materials Engineering and Performance,2010,19(2):155-165.
- [14]Coelho R S,Kostka A,Pinto H,et al.Microstructure and me chanical properties of magnesium alloy AZ31B laser beam welds[J].Materials Science and Engineering A,2008,485(1/2):20-30.
- [15]Thomas W M,Nicholas E D.Friction stir welding for the transportation industries[J].Materials&Design,1997,18(4/6):269-273.
- [16]孙湄楠.镁合金AZ31B搅拌摩擦焊接头组织与力学性能的研究[D].长春:吉林大学,2010.
- [17]张华,林三宝,吴林,等.AZ31镁合金搅拌摩擦焊接头力学性能[J].焊接学报,2003,24(5):65-68.
- [18]张华,林三宝,吴林,等.AZ31镁合金搅拌摩擦焊接头断裂机制[J].材料工程,2003(1):33-36.
- [19]张彦军,丁成钢,权高峰,等.AZ31镁合金搅拌摩擦焊接头组织和冲击韧性分析[J].热加工工艺,2009,38(3):105-107.
- [20]Forcellese A,Simoncini M.Plastic flow behaviour and form ability of friction stir welded joints in AZ31 thin sheets ob tained using the“pinless”tool configuration[J].Materials and Design,2012,36:123-129.
- [21]刘奋军,杜正良,陈少平,等.电场对AZ31B/Al扩散结合界面结构及力学性能的影响[J].兵器材料科学与工程,2009,32(5):18-22.
- [22]杜正良,刘奋军,陈少平,等.电场对AZ31B/Al连接界面扩散反应和扩散溶解层结构的影响[J].材料热处理学报,2010,31(3):102-106.
- [23]孟庆森,陈少平,刘奋军,等.AZ31B/Al电场固相扩散界面结构及性能分析[J].稀有金属材料与工程,2009,38(3):191-195.
- [24]杜双明,赵维涛,刘刚,等.AZ31镁合金扩散钎焊界面区域的组织结构及性能[J].热加工工艺,2012,40(1):140-144.
- [25]刘黎明,王继峰,宋刚.激光电弧复合焊接AZ31B镁合金[J].中国激光,2004,31(12):1523-1526.
- [26]迟鸣声,刘黎明,宋刚.镁合金AZ31B的激光-TIG复合热源缝焊工艺[J].焊接学报,2005,26(3):21-24.