陈斌;于爱兵;赵杰;王燕琳;

• 1:宁波大学机械工程与力学学院

摘要(Abstract)：

采用响应曲面法对氟金云母玻璃陶瓷进行车削加工试验,以高速钢刀具磨损为响应,以切削用量为试验因素,通过回归分析、模型检验及方差分析,建立刀具磨损量与切削用量之间的数学模型,分析切削用量对刀具磨损的影响规律。研究表明:建立的刀具磨损量模型具有较好的适合性和显著性,预测精度较高,能较好地描述刀具磨损与切削用量参数之间的关系;切削用量对刀具磨损量的影响程度依次为进给速度、切削速度和切削深度;应用刀具磨损量模型,有助于选择合理的切削用量,减少和控制刀具磨损。

关键词(KeyWords)： 高速钢刀具;切削用量;刀具磨损;建模

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(51175270);; 宁波市自然科学基金项目(2012A610072)

作者(Author): 陈斌;于爱兵;赵杰;王燕琳;

Email:

DOI: 10.14024/j.cnki.1004-244x.20160421.004

参考文献(References)：

• [1]MOHAN R M,ALEXANDER G,KHALED A H.Optimization of various cutting parameters on the surface roughness of the machinable glass ceramic with two flute square end mills of micro grain solid carbide[J].International Journal of Precision Engineering and Manufacturing,2012,13(9):1549-1554.
• [2]QUINN J B,SU L,FLANDERS L,et al.Edge toughness and material properties related to the machining of dental ceramics[J].Machining Science and Technology,2000,4(2):291-304.
• [3]HYUNHO S,BYUNG-MOO S.A method to quantify the drilling machinability of machinable ceramics from the viewpoint of preventing chipping[J].Ceramics International,2013,39:9815-9818.
• [4]MOHAMED A D,HASHMI M S J,EL-BARADIE M A.Surface roughness prediction model by design of experiments for turning machinable glass-ceramic(Macor)[J].Journal of Materials Processing Technology,2005,164/165:1289-1293.
• [5]CHEN X H,MA L J,LI C,CAO X B.Experimental study and genetic algorithm-based optimization of cutting parameters in cutting engineering ceramics[J].International Journal of Advanced Manufacturing Technology,2014,74:807-817.
• [6]马廉洁,于爱兵,韩廷水,等.氟金云母陶瓷车削参数对刀具磨损的影响[J].兵器材料科学与工程,2007,30(1):1-4.
• [7]马廉洁,娄琳,钟利军.氟金云母陶瓷车削加工中刀具磨损的研究[J].中国机械工程,2007,18(17):2098-2101.
• [8]Montgomery D C.实验设计与分析[M].傅钰生,等译.6版.北京:人民邮电出版社,2009:60-62,367-370,513-521.
• [9]庄楚强,吴亚森.应用数理统计基础[M].广州:华南理工大学出版社,2002:321-324,566.
• [10]赵选民.试验设计方法[M].北京:科学出版社,2006:36-41.
• [11]陈日曜.金属切削原理[M].2版.北京:机械工业出版社,2011:99.