AlN-Y_2O_3液相烧结碳化硅陶瓷Liquid phase sintered silicon carbide with AlN-Y_2O_3
陈宇红;韩非;江涌;韩凤兰;吴澜尔;
摘要(Abstract):
采用无压烧结,以AlN与Y2O3的摩尔分数为60%∶40%作为烧结助剂进行碳化硅液相烧结,得到致密的烧结体。研究不同添加剂含量和不同保护气氛对烧结工艺的影响,并对烧结体的显微形貌和相进行分析。结果表明,高烧结助剂含量可在较低温度下实现致密化,但高温下液相挥发导致密度降低。与氩气作为保护气氛相比,氮气可抑制氮化铝的分解反应,有利于烧结。烧结体的晶粒均匀、细小,第二相均匀分布。烧结体的主相为6HSiC,并有氧氮化物的生成。
关键词(KeyWords): 碳化硅;氮化铝;液相烧结;烧结气氛
基金项目(Foundation): 国家“863”计划项目(2002AA332110);; 宁夏国际合作项目(NXIC-2006-004)
作者(Author): 陈宇红;韩非;江涌;韩凤兰;吴澜尔;
Email:
DOI:
参考文献(References):
- [1]Prochazka S.Sintering of silicon carbide[C]//Burke J J,GorumA E,Katz R M,eds.Proceedings of the Conference on Ceram-ics for High Performance Applications.Hyannis:MA,1975:239.
- [2]Chantikul D,Anstis G R,Lawn B R.A critical evaluation ofindentation techniques for measureing frcture toughness-IIstrength method[J].J Am Cream Soc,1981,64(1):539-544.
- [3]Omori M,Takei H.Preparation of pressureless sintering of SiC-Y2O3-Al2O3[J].J Mater Sci,1988,23(10):3744-3747.
- [4]KIM D H,KIM C H.Toughening behavior of silicon carbide with addition of yttria and alumina[J].J Am Ceram Soc,1990,73(5):1431-1434.
- [5]谭寿洪,陈忠明,江东亮.液相烧结SiC陶瓷[J].硅酸盐学报,1998,26(2):191-197.
- [6]Koushik Biswas.Liquid phase sintering of SiC ceramics withrare earth sesquioxides[D].Stuttgart:University of Stuttgart,2002.
- [7]Rixecker G,Biswas K,Rosinus A,et al.Fracture properties of SiC ceramics with oxynitride additive[J].J Euro Ceram Soc,2002,22:2669-2675.
- [8]Rixecker G,Biswas K,Wiedmann I,et al.Liquid-phase sin-tered ceramics with oxynitride additives[J].J Ceram Procesing Reseach,2000(1):12-19.
- [9]Haihui Y E,Georg Rixecker,Siglind Haug,et al.Composition-al identification of the intergranular phase in liquid phase sin-tered SiC[J].J Eur Ceramic Soc,2002,22:2379-2387.