用Hopkinson杆技术研究材料动态断裂韧性的进展Progress in the research of dynamic fracture toughness based on Hopkinson bar technique
崔新忠;范亚夫;纪伟;陈捷;
摘要(Abstract):
综述应用Hopkinson杆技术进行材料动态断裂韧性研究的实验方法。介绍入射波整形技术和力传感器技术在动态断裂韧性实验中的应用。简要总结动态应力强度因子的计算方法和裂纹起裂时间的确定方法。展望动态断裂韧性研究的发展趋势。
关键词(KeyWords): 动态断裂韧性;Hopkinson杆技术;综述;动态应力强度因子;加载率
基金项目(Foundation):
作者(Author): 崔新忠;范亚夫;纪伟;陈捷;
Email:
DOI: 10.14024/j.cnki.1004-244x.2010.02.020
参考文献(References):
- [1]Radon J C,Turner C E.Fracture toughness measurements byinstrumented impact test[J].Eng Fracture Mech,1969,1(3):411-428.
- [2]Kobayashi T.Analysis of impact properties of A533 steel fornuclear reactor pressure vessel by instrumented charpy test[J].Eng Fracture Mech,1984,19(1):49-65.
- [3]Yokoyama T.Determination of dynamic fracture initiationtoughness using a novel impact bend test procedure[J].JPressure Vessel Technol,1993,115(4):389-397.
- [4]Singh R P,Parameswaran V.An experimental investigation ofdynamic crack propagation in a brittle material reinforcedwith a ductile layer[J].Optics and Lasers in Engineering,2003,40(4):289-306.
- [5]Galvez F,Cendon D,Garcia N,et al.Dynamic fracture toughness of a high strength armor steel[J].Engineering FailureAnalysis,2009,16(8):2567-2575.
- [6]徐泽建,李玉龙,李娜,等.加载速率对高强钢40Cr和30CrMnSiNi2AⅠ型动态断裂韧性的影响[J].金属学报,2006,42(9):965-970.
- [7]宫能平,李贤.45#钢动态断裂韧性测试的试验研究[J].安徽理工大学学报:自然科学版,2007,27(4):65-68.
- [8]Weerasooriya T,Moy P,Casem D,et al.A four-point bendtechnique to determine dynamic fracture toughness ofceramics[J].J Am Ceram Soc,2006,89(3):990-995.
- [9]Adharapurapu R R,Jiang F C,Vecchio K S.Dynamic fractureof bovine bone[J].Mater Sci Eng C,2006,26(8):1325-1332.
- [10]Kobayashi T,Yamamoto I,Ninomi M.Evaluation of dynamicfracture toughness parameters by instrumented charpy im-pact test[J].Eng Fracture Mech,1986,24(5):773-782.
- [11]Kalthoff J F.On the measurement of dynamic fractureroughness-a review of recent work[J].International Journal ofFracture,1985,27(3/4):277-298.
- [12]Rubio L,Fernandez-Saez J,Navarro C.Determination of dy-namic fracture-initiation toughness using three-point bendingtests in a modified Hopkinson Pressure Bar[J].Exp Mech,2003,43(4):379-386.
- [13]孙洪涛,刘元镛.用Hopkinson压杆技术研究试样几何对动态起裂韧性的影响[J].实验力学,1996,11(2):141-146.
- [14]刘瑞堂,果春焕,王永东,等.Hopkinson杆三点弯曲试验中试样与支座接触状态分析[J].机械强度,2009,31(2):215-220.
- [15]曹茂盛,张铁夫,邱成军,等.结构型吸波材料的动载断裂韧性[J].材料研究学报,2003,17(4):365-369.
- [16]曹茂盛,张铁夫,刘瑞堂,等.层板复合材料动态断裂韧性测试的SHPB技术研究[J].材料科学与工艺,2002,10(4):427-430.
- [17]宋顺成,王明超,刘筱玲,等.陶瓷材料动态抗弯性能测试[J].爆炸与冲击,2009,29(2):167-171.
- [18]Rizal S,Homma H.Dimple fracture under short pulse load-ing[J].International Journal of Impact Engineering,2000,24:69-83.
- [19]Marur P R.Dynamic analysis of one-point bend impact test[J].Eng Fracture Mech,2000,67:41-53.
- [20]Nishioka T,Perl M,Atluri S.An analysis of dynamic frac-ture in an impact test specimen[J].J Pressure Vessel Tech-nol,1983,105(2):124-131.
- [21]HAN M S,CHO J U,SUH C M.A study on three phasesdung the period for crack initiation under impact load[J].International Journal of Modern Phsics B,2003,17(8/9):1362-1367.
- [22]JIANG F,ROHATGI A,VECCHIO K S.Analysis of the dy-namic responses for a pre-cracked three-point bend speci-men[J].International Journal of Fracture,2004,127(2):147-165.
- [23]Jiang F C,Liu R T,Zhang X,et al.Evaluation of dynamicfracture toughness KId by Hopkinson pressure bar loadedinstrumented charpy impact test[J].Eng Fracture Mech,2004,71:279-287.
- [24]Chen W W,Rajendran A M,Bo S,et al.Dynamic fracture ofceramics in armor applications[J].J Am Ceram Soc,2007,90(4):1005-1018.
- [25]Frew D J,Forrestal M J,Chen W.Pulse shaping techniquesfor testing brittle materials with a split Hopkinson PressureBar[J].Exp Mech,2002,42(1):93-106.
- [26]Owen D,Zhuang S,Rosakis A,Ravichandran G.Experimen-tal determination of dynamic crack initiation and propaga-tion fracture toughness in thin aluminum sheets[J].Interna-tional Journal of Fracture,1998,90(1/2):153-174.
- [27]Syn C J,Chen W W.Surface morphology effects on high-ratefracture of an aluminum/epoxy interface[J].J Compos Mater,2008,42(16):1639-1658.
- [28]OWEN D M,ZHUANG S,ROSAKIS A J,et al.Experimen-tal determination of dynamic crack initiation and propaga-tion fracture toughness in thin aluminum sheets[J].Interna-tional Journal of Fracture,1998,90:153-174.
- [29]韩小平,曹效昂,朱西平.冲击载荷下CFRP及GFRP层板断裂韧性的研究[J].复合材料学报,2007,24(2):137-142.
- [30]宫能平,夏源明.周边切口短圆柱试件的杆杆型冲击拉伸试验系统的弹塑性有限元分析[J].固体力学学报,2002,23(2):223-231.
- [31]Wilson M L,Hawley R H,Duffy J.The Effect of loading rateand temperature on fracture initiation in 1020 hot-rolledsteel[J].Eng Fracture Mech,1980,13(2):371-385.
- [32]Duffy J,Suresh S,Cho K,et al.A Method for dynamic frac-ture initiation testing of ceramics[J].Journal of EngineeringMaterials and Technology,1988,110(4):325-331.
- [33]李玉龙,许泽健.高强钢40Cr和30CrMnSiNi2AI型和II型动态断裂韧性的研究[C].第四届全国爆炸力学实验技术学术会议,中国福建武夷山,2006:142-151.
- [34]Klepazko J R,Bassim M N,Hsu T R.Fracture toughness ofcoal under quasi-static and impact loading[J].Eng FractureMech,1984,19(2):305-316.
- [35]王通,王强,于长滨,等.用实验方法研究水泥石动态断裂韧性[J].地震工程与工程振动,2006,26(4):250-254.
- [36]Sun C T,Han C.A method for testing interlaminar dynamicfracture toughness of polymeri composites[J].Composites:Part B,2004,35B(6):647-655.
- [37]田兰桥,段祝平.应用霍普金森压杆技术进行材料动态断裂韧性研究[J].兵器材料科学与工程,1991,11:33-39.
- [38]王祥林,黄义春.水泥石动态断裂韧性的实验研究[J].哈尔滨建筑大学学报,1998,31(5):8-13.
- [39]张宗贤,赵清,冠绍全,等.用短棒试件测定岩石的动静态断裂韧度[J].北京科技大学学报,1992,14(2):123-127.
- [40]许泽建,李玉龙,刘元镛,等.两种高强钢在高加载速率下的Ⅱ型动态断裂韧性[J].金属学报,2006,42(6):635-640.
- [41]董新龙,王礼立,悟王,等.40CrNiMoA钢的动态剪切断裂行为研究[J].爆炸与冲击,1999,19(3):222-228.
- [42]董世明,夏源明.CCCD-SHPB动态断裂试验系统原理及数值分析[J].机械强度,2004,26(z1):184-187.
- [43]周君,汪洋,夏源明.有机玻璃纯Ⅰ型和纯Ⅱ型动态断裂行为的实验研究[J].高分子材料科学与工程,2008,24(2):10-18.
- [44]Chen R,Xia K,Dai F,et al.Determination of dynamicfracture parameters using a semi-circular bend technique insplit Hopkinson pressure bar testing[J].Eng Fract Mech,2009,76(9):1268-1276.
- [45]郑坚,王泽平,段祝平.动态断裂的加载和测试技术[J].力学进展,1994,24(4):459-473.
- [46]Rittel D,Maigre H.An investigation of dynamic crack initia-tion in PMMA[J].Mech.Mater,1996,23(3):229-239.
- [47]Rubio-Gonzalez C,Gallardo-Gonzalez J A,Mesmacque G,et al.Dynamic fracture toughness of pre-fatigued materials[J].Int J Fatigue,2008,30(6):1056-1064.
- [48]李玉龙,刘元镛.用弹簧质量模型求解三点弯曲试样的动态应力强度因子[J].固体力学学报,1994,15(1):75-79.
- [49]Bacon C,Farm J,Lataillade J.Dynamic fracture toughnessdetermined from load-point displacement[J].Exp Mech,1994,20(1):217-223.
- [50]Kishimoto K,Aoki S,Sakata M.Simple formula for dynamicstress intensity factor of pre-cracked charpy specimen[J].Eng Fracture Mech,1980,13(3):501-508.
- [51]Dally J W,Barker D B.Dynamic measurements of initiationtoughness at high loading rates[J].Exp Mech,1988,28(3):298-303.
- [52]Nishioka T,Atluri S.A method for determining dynamicstress intensity factors from COD measurement at the notchmouth in dynamic tear testing[J].Eng Fracture Mech,1982,16(3):333-339.
- [53]Popelar C,Anderson J,Nagy A.An Experimental method fordetermining dynamic fracture toughness[J].Exp Mech,2000,40(4):401-407.
- [54]Loya J A,Fernandez-Saez J.Dynamic Fracture-initiationtoughness determination of Al 7075-T651 aluminum alloy[J].J Test Eval,2007,35(1):25-30.
- [55]Anderson D D,Rosakis A J.Comparison of three real timetechniques for the measurement of dynamic fractureinitiation toughness in metals[J].Eng Fract Mech,2005,72:535-555.
- [56]Dally J W,Sanford R J.Strain-gage methods for measuringthe opening-mode stress-intensity factor,KI[J].Exp Mech,1987,27(4):381-388.