快速凝固对AZ61组织及性能的影响Influence of rapid solidification on microstructure and properties of AZ61 alloys
王敬丰;魏怡芸;吴夏;潘复生;
摘要(Abstract):
通过铜模喷铸的方法制备得到快速凝固态AZ61镁合金,并通过X射线衍射(XRD)分析、扫描电子显微镜(SEM)观察对铸态及快速凝固态AZ61镁合金的组织结构及相的组成进行表征。研究发现快速凝固态AZ61镁合金的组织均匀细小,且样品中弥散分布着颗粒状的Mg17Al12相,除此之外,该合金的α-Mg中还固溶了大量的Al、Zn元素。通过压缩实验发现快速凝固态AZ61镁合金具有极高的强度,其压缩断裂强度达到440 MPa,远高于铸态AZ61镁合金。同时还测试各个样品在3.5%NaCl中性溶液中TAFEL曲线并结合腐蚀表面SEM图研究样品的腐蚀性能。
关键词(KeyWords): AZ61镁合金;显微组织;力学性能;腐蚀
基金项目(Foundation): 国家自然科学基金委员会-中国工程物理研究院联合基金资助项目(10876045);; 重庆市科技攻关计划项目(cstc2008AB4114;cstc2006AA4012);; 中国博士后科学基金资助项目(20080430751)
作者(Author): 王敬丰;魏怡芸;吴夏;潘复生;
Email:
DOI: 10.14024/j.cnki.1004-244x.2010.03.004
参考文献(References):
- [1]罗爱华.镁在汽车工业上的应用[C]//上海压铸镁国际研讨会论文集.中国上海:[出版者不详],2001:64-76.
- [2]Srivatsan T S,Vasudevan S,Petraroli M.The tensile deforma-tion and fracture behavior of a magnesium alloy[J].J AlloysCompd,2008,461:154-9.
- [3]Froes F H,Kim Y W,Krishnamurthy S.Rapid solidification oflightweight metal alloys[J].Mater Sci Eng A,1989,117:19-32.
- [4]Kim S H,Kim D H,Kim N J.Structure and properties ofrapidly solidified Mg2Al2Zn2Nd alloys[J].Mater Sci Eng A,1997,226/228:1030-1034.
- [5]Li Y,Jones H.Structure and mechanical properties of rapidlysolidified magnesium based Mg2Al2Zn2 RE alloys consolidatedby extrusion[J].Materials Science and Technology,1996(12):981-989.
- [6]刘正,范立坤,林立,等.镁基快速凝固合金的研究与开发[J].汽车工艺与材料,2003(6):20-24.
- [7]徐锦锋,瞿秋亚,袁森.AZ91D镁合金的快速凝固特征[J].中国有色金属学报,2004,14(6):939-944.
- [8]黄正华,郭学锋,张忠明.快速凝固AZ91D镁合金组织的研究[J].材料热处理学报,2005,26(1):32-35.
- [9]Zhao H L,Guan S K,Zheng F Y.Microstructure andproperties of AZ31 magnesium alloy with rapid solidification[J].Trans Nonferrous Met Soc China,2005,15:144-148.
- [10]Teng Haitao,Zhang Xiaoli,Zhang Zhongtao,et al.Researchon microstructures of sub-rapidly solidified AZ61 magnesiumalloy[J].Materials Characterization,2009,60(6):482-486.
- [11]Maeng D Y,Kim T S,Lee J H,et al.Microstructure andstrength of rapidly solidified and extruded Mg2Zn alloys[J].Scripta Materialia,2000,43(5):385-389.