具备绝热剪切敏感性的钨合金穿甲弹材料研究现状Research status of WHA with adiabatic shear susceptibility
田开文,尚福军,祝理君
摘要(Abstract)：
通过对绝热剪切在穿甲过程中作用的分析,比较了纯钨、钨合金和铀合金三类高密度弹芯材料的常规力学性能和穿甲性能,以及弹丸在穿甲时的破坏行为,重点介绍了近年来国外用铪、金属间化合物、SiO2复合材料、钛合金、高强钢为基体的钨合金及钨纤维/金属玻璃复合材料穿甲弹的研究进展情况,并指明了新型基体材料钨合金今后的研制方向。
关键词(KeyWords)： 钨合金;:绝热剪切;穿甲弹
基金项目(Foundation):
作者(Author): 田开文,尚福军,祝理君
Email:
DOI:
参考文献(References)：
- [1] Upadhyaya Anish. Processing strategy for consolidating tungsten heavy alloys for ordnance applications[J]. Materials Chemistry and Physics,2001,67:101-110.
- [2] Mgancss Lee S. Properties and performance of KE penetrator materials[C]. Int Conf. on Tungten and Tungsten Alloys, 1992:1 5-21.
- [3] Mganess Lee S, Daniel Scheffler. Deformation and failure of a tungsten heavy alloy penetrator as a function of stress state[C] Proceedings of the 2000 International Conference on Tungsten. Hard Metals and Refractory Alloys,2000:35-42.
- [4] Bentley A R, Hogwood M C, Power M. Microstructural aspects of highly deformed tungsten heavy alloys[C]. Int Conf on Tungsten and Tungsten Alloys, 1992: 145-153.
- [5] Leonard Wendy, Magness Lee. Effect of microstructural orientation on tungsten heavy alloy penetrator performance [C]. Int Conf on Tungsten and Tungsten Alloys, 1992:129-135.
- [6] Zurek A, Follansbee. A comparison of shear localization susceptibility in U-0.75 wt. pct. Ti and W-Ni-Fe during high strain rate deformation[J]. Met Trans, 1995(26A):1493.
- [7] Magness L. An overview of the penetration performances of tungsten and depleted uranium alloy penetrators: ballistic perf ormances and metallographic examinations[C]. 20th International-Symposium on Ballistics, 2002:23-27.
- [8] Magness L S, Farrand T G, Deformation behavior and its relationship to the penetration performance of high-density KE penetrator materials [C]. 1990 Army Science Conference, 1990:465-452.
- [9] Rogers H C, Adiabatic plastic deformation[J]. Ann Rev Mater Sci, 1979,9:283-311.
- [10] Zurek A K, Follansbee PS, A comparison of shear localization susceptibility in U-0.75Wt Pct Ti and W-Ni-Fe during high strain rate deformation[J]. Met Trans A, 1995,26A: 1483-1490.
- [11] Magness L S, Lopatin C. Split Hopkinson Bar compression screening tests of high density penetrator materials[C]. Proc of the Army Symposium on Solid Mechanics, 1993:633-644.
- [12] Leonard W, Magness L, Kapoor D. Improving mechanical propertiesof tungsten heavy alloy composites through thermomec-hanical processing [C]. The 1st International Conference on Tungsten and Tungsten Alloys, 1992.