万林林;刘志坚;邓朝晖;刘伟;

• 1:湖南科技大学难加工材料高效精密加工湖南省重点实验室

摘要(Abstract)：

针对工程陶瓷磨削损伤现象,探讨材料去除与损伤机理,综述国内外基于断裂力学和损伤力学的损伤建模技术在工程陶瓷磨削损伤领域的研究进展。对单颗磨粒建模和砂轮三维形貌建模方法进行总结讨论,在此基础上介绍数值模拟技术在工程陶瓷磨削损伤研究中的应用现状。指出基于细观损伤力学,实现针对力热耦合作用下工程陶瓷磨削损伤的数值模拟,最后就这一方向的深入研究工作做展望。

关键词(KeyWords)： 工程陶瓷;磨削损伤;细观力学建模;数值模拟

Abstract:

Keywords:

基金项目(Foundation): 国家自然科学基金项目(51405152);; 湖南省自然科学基金项目(14JJ6025);; 难加工材料高效精密加工湖南省重点实验室开放基金项目(E21433)

作者(Author): 万林林;刘志坚;邓朝晖;刘伟;

Email:

DOI: 10.14024/j.cnki.1004-244x.20160616.002

参考文献(References)：

• [1]金志浩,高积强,乔冠军.工程陶瓷材料[M].西安:西安交通大学出版社,2000:130-131.
• [2]任敬心,康仁科,王西彬.难加工材料磨削技术[M].北京:电子工业出版社,2011:29-32.
• [3]马里内斯库.先进陶瓷加工导论[M].北京:国防工业出版社,2010:1-3.
• [4]田欣利,徐西鹏,袁巨龙,等.工程陶瓷先进加工与质量控制技术[M].北京:国防工业出版社,2015:20-30.
• [5]于思远,林彬.工程陶瓷材料的加工技术及其应用[M].北京:机械工业出版社,2008:128-153.
• [6]MALKIN S,RITTER J E.Grinding mechanisms and strength degradation in ceramics[J].Journal of Engineering for Industry,1989,111(2):167-174.
• [7]MALKIN S,HWANG T W.Grinding mechanisms for ceramics[J].CIRP Annals-Manufacturing Technology,1996,45(2):569-580.
• [8]邓朝晖,张璧,孙宗禹,等.陶瓷磨削材料去除机理的研究进展[J].中国机械工程,2002,13(18):1608-1611.
• [9]ZHANG B,HOWES T D.Material-rectal mechanisms in grinding ceramics[J].CIRP Annals-Manufacturing Technology,1994,43(1):305-308.
• [10]KIRCHNER H P.Damage penetration at elongated machining grooves in hot-pressed Si3N4[J].Journal of the American Ceramic Society,1984,67(2):127-132.
• [11]BIFANO T G,DOW T A,SCATTERGOOD R O.Ductile-regime grinding:a new technology for machining brittle materials[J].Journal of Engineering for Industry,1991,113(2):184-189.
• [12]CONWAY J C,KIRCHNER H P.Crack branching as a mechanism of crushing during grinding[J].Journal of the American Ceramic Society,1986,69(8):603-607.
• [13]沈成康.断裂力学[M].上海:同济大学出版社,1996:1-7.
• [14]KOSHY P,JAIN V K,LAL G K.Stochastic simulation approach to modeling diamond wheel topography[J].International Journal of Machine Tools&Manufacture,1997,37(37):751-761.
• [15]LAWN B R,EVANS A G.A model for crack initiation in elastic/plastic indentation fields[J].Journal of Materials Science,1977,12(11):2195-2199.
• [16]张璧,孟鉴.工程陶瓷磨削加工损伤的探讨[J].纳米技术与精密工程,2003,1(1):48-56.
• [17]BIFANO T G,FAWCETT S C.Specific grinding energy as an in-process control variable for ductile-regime grinding[J].Precision Engineering,1991,13(4):256-262.
• [18]ZHANG B,HOWES T D.Subsurface evaluation of ground ceramics[J].CIRP Annals-Manufacturing Technology,1995,44(1):263-266.
• [19]邓朝晖.纳米结构陶瓷涂层精密磨削机理及仿真预报技术的研究[D].长沙:湖南大学,2004:135-138.
• [20]林滨,张光秀,刘超,等.工程陶瓷磨削表面损伤模型的研究[J].稀有金属材料与工程,2008,37(S1):821-824.
• [21]CHEN J Y,SHEN J Y,HUANG H,et al.Grinding characteristics in high speed grinding of engineering ceramics with brazed diamond wheels[J].Journal of Materials Processing Technology,2010,210(6/7):899-906.
• [22]谢桂芝,尚振涛,盛晓敏,等.工程陶瓷高速深磨磨削力模型的研究[J].机械工程学报,2011,47(11):169-176.
• [23]任会兰,方敏杰,贺建华.压缩载荷下陶瓷材料声发射特性的实验研究[J].材料工程,2012(2):30-34,54.
• [24]LIN B,CHEN S G,HAN X S,et al.Automated inspection of engineering ceramic grinding surface damage based on image recognition[J].Transactions of Tianjin University,2013,19(4):267-271.
• [25]CHEN S G,LIN B,HAN X S,et al.Automated inspection of engineering ceramic grinding surface damage based on image recognition[J].International Journal of Advanced Manufacturing Technology,2013,66(1/2/3/4):431-443.
• [26]唐修检,刘谦,田欣利,等.切向载荷作用下氮化硅陶瓷崩碎损伤规律与机理[J].光学精密工程,2015,23(7):2023-2030.
• [27]段士伟.陶瓷材料的静动态力学性能和损伤特性研究[D].合肥:中国科技大学,2013:37-45.
• [28]JOHNSON G R,HOLMQUIST T J.An improved computational constitutive model for brittle materials[C]//AIP Conference Proceedings.USA:AIP Publishing,1994,309(1):981-984.
• [29]RAJENDRAN A M,KROUPA J L.Impact damage model for ceramic materials[J].Journal of Applied Physics,1989,66(8):3560-3565.
• [30]NEMAT-NASSER S,NI L.A fiber-bridged crack with rate-dependent bridging forces[J].Journal of the Mechanics&Physics of Solids,2001,49(11):2635-2650.
• [31]LIU X,ZHANG B,LIU X,et al.Machining simulation for ceramics based on continuum damage mechanics[J].Journal of Manufacturing Science&Engineering,2002,124(3):553-561.
• [32]ZUO Q H,ADDESSIO F L,DIENES J K,et al.A rate-dependent damage model for brittle materials based on the dominant crack[J].International Journal of Solids&Structures,2006,43(11):3350-3380.
• [33]鲍雨梅.一种陶瓷材料表面/亚表面损伤表征方法及其在磨削损伤检测中的应用[D].杭州:浙江工业大学,2009:35-43.
• [34]方敏杰,宁建国,任会兰.考虑微裂纹相互作用的氧化铝陶瓷一维应力本构模型[C]//第十二届现代数学和力学会议论文集.北京:中国力学学会,2010:25-31.
• [35]林滨,张彦斌,陈善功.基于非负矩阵分解算法的工程陶瓷磨削表面损伤检测[J].光学精密工程,2012,20(11):2459-2464.
• [36]LIN B,CHEN S G,HAN X S,et al.Automatic damage detection of engineering ceramics ground surface based on texture analysis[J].Transactions of Tianjin University,2013,19(4):367-379.
• [37]CHEN X,BRIAN W R.Analysis and simulation of the grinding process.Part I:Generation of the grinding wheel surface[J].International Journal of Machine Tools&Manufacture,1996,36(8):897-906.
• [38]HOU Z B,KOMANDURI R.On the mechanics of the grinding process-Part I.Stochastic nature of the grinding process[J].International Journal of Machine Tools&Manufacture,2003,43(15):1579-1593.
• [39]CHAKRABARTI S,PAUL S.Numerical modeling of surface topography in super abrasive grinding[J].International Journal of Advanced Manufacturing Technology,2008,39(1/2):29-38.
• [40]吕长飞,李郝林.外圆磨削砂轮形貌仿真与工件表面粗糙度预测[J].中国机械工程,2012,23(6):666-671.
• [41]NGUYEN T A,BUTLER D L.Simulation of precision grinding process,part 1:generation of the grinding wheel surface[J].International Journal of Machine Tools&Manufacture,2005,45(11):1321-1328.
• [42]刘月明,巩亚东,曹振轩.基于数值建模的砂轮形貌仿真与测量[J].机械工程学报,2012,48(23):184-190.
• [43]宿崇,许立,李明高,等.磨粒建模方法与切削过程仿真研究[J].航空学报,2012,33(11):2130-2135.
• [44]赵小雨.金刚石砂轮三维形貌建模及磨削工程陶瓷的仿真与实验研究[D].湘潭:湖南科技大学,2015:10-40.
• [45]刘伟,邓朝晖,万林林,等.单颗金刚石磨粒切削氮化硅陶瓷仿真与试验研究[J].机械工程学报,2015,51(21):191-198.
• [46]LI K,LIAO T W.Surface/subsurface damage and the fracture strength of ground ceramics[J].Journal of Materials Processing Technology,1996,57(3/4):207-220.
• [47]孔令志,赵波.工程陶瓷磨削表面/亚表面损伤的产生及其控制[J].航空精密制造技术,2010,39(1):63-66.
• [48]张伟文.基于有限元与分子动力学的恒压磨削研究[D].重庆:重庆大学,2010:2-7.
• [49]KACHANOV L M.Introduction to continuum damage mechanics[J].Journal of Applied Mechanics,1987,54(2):481.
• [50]LI J,SONG F,JIANG C P.Direct numerical simulations on crack formation in ceramic materials under thermal shock by using a non-local fracture model[J].Journal of the European Ceramic Society,2013,33(13/14):2677-2687.
• [51]CHEN J,FANG Q H,LIU Y.Interaction between dislocation and subsurface crack under condition of slip caused by halfplane contact surface normal force[J].Engineering Fracture Mechanics,2013,114(114):115-126.
• [52]FENG J,CHEN P,NI J.Prediction of grinding force in microgrinding of ceramic materials by cohesive zone-based finite element method[J].International Journal of Advanced Manufacturing Technology,2013,68(5/6/7/8):1039-1053.
• [53]SIEBRECHT T,BIERMANN D,LUDWIG H,et al.Simulation of grinding processes using finite element analysis and geometric simulation of individual grains[J].Production Engineering,2014,8(8):345-353.
• [54]ESMAEILZARE A,RAHIMI A,REZAEI S M.Investigation of subsurface damages and surface roughness in grinding process of Zerodur®glass-ceramic[J].Applied Surface Science,2014,313(7):67-75.
• [55]YAO Z,GU W,LI K.Relationship between surface roughness and subsurface crack depth during grinding of optical glass BK7[J].Journal of Materials Processing Technology,2012,212(4):969-976.
• [56]LIU Y,WU X,GUO Q,et al.Experiments and numerical simulations of thermal shock crack patterns in thin circular ceramic specimens[J].Ceramics International,2014,41(1):1107-1114.
• [57]CHEN J,FANG Q H,LI P.Effect of grinding wheel spindle vibration on surface roughness and subsurface damage in brittle material grinding[J].International Journal of Machine Tools&Manufacture,2015,91:12-23.
• [58]RENTSCH R,INASAKI I.Investigation of surface integrity by molecular dynamics simulation[J].CIRP Annals-Manufacturing Technology,1995,44(1):295-298.
• [59]RENTSCH R,INASAKI I.Molecular dynamics simulation for abrasive processes[J].CIRP Annals-Manufacturing Technology,1994,43(1):327-330.
• [60]ZHANG L,TANAKA H.Towards a deeper understanding of wear and friction on the atomic scale-a molecular dynamics analysis[J].Wear,1997,211(1):44-53.
• [61]SHIMIZU J,ZHOU L B,EDA H.Simulation and experiment analysis of super high-speed grinding of ductile material[J].Journal of Materials Processing Technology,2002,129(1/2/3):19-24.
• [62]HOU Z B,KOMANDURI R.On the mechanics of the grinding process-Part I.Stochastic nature of the grinding process[J].International Journal of Machine Tools&Manufacture,2003,43(15):1579-1593.
• [63]LIN B,YU S Y,WANG S X.An experimental study on molecular dynamics simulation in nanometer grinding[J].Journal of Materials Processing Technology,2003,138(1/2/3):484-488.
• [64]宿崇,施志辉,刘元伟.陶瓷CBN砂轮地貌建模与磨削仿真[J].中国机械工程,2012,23(14):1742-1745.
• [65]ZHU D H,YAN S J,LI B.Single-grit modeling and simulation of crack initiation and propagation in Si C grinding using maximum undeformed chip thickness[J].Computational Materials Science,2014,92(5):13-21.
• [66]张东进.切削加工热力耦合建模及其试验研究[D].上海:上海交通大学,2008:12-26.
• [67]KLOCKE F,BECK T,HOPPE S,et al.Examples of FEM application in manufacturing technology[J].Journal of Materials Processing Technology,2002,120(1/2/3):450-457.
• [68]ANANTHARAM B S,DANCKERT J,FAURHOLDT T G.Finite element analysis of stresses due to normal and sliding contact conditions on an elastic surface[C]//Fourth European LS-DYNA Users Conference.Germany:Konferenceartikel i proceeding,2003:21-34.
• [69]OHBUCHI Y.Finite element modeling of chip formation in the domain of negative rake angle cutting[J].Transactions of the Asme Journal of Engineering Materials&Technology,2003,125(3):324-332.
• [70]张雪萍,王和平,高二威.单粒磨削过程仿真与工件表面残余应力的离散度分析[J].上海交通大学学报,2009(5):717-721.
• [71]言兰,姜峰,融亦鸣.基于数值仿真技术的单颗磨粒切削机理[J].机械工程学报,2012,48(11):172-182.
• [72]倪嘉铭.高速外圆磨削热力耦合机理及其对表面完整性的影响[D].上海:东华大学,2014:19-50.