孙国元,陈光,刘平

• 1:南京理工大学金属纳米材料与技术联合实验室
• 2:南京理工大学金属纳米材料与技术联合实验室
• 3:南京理工大学金属纳米材料与技术联合实验室 江苏 南京 210094
• 4:江苏 南京 210094

摘要(Abstract)：

综述了Mg65Cu25Y10非晶合金的晶化行为,包括DSC曲线的基本特征、制备状态和合金化对晶化行为的影响以及晶体相形成的热力学与动力学;有研究表明,旋淬Mg65Cu25Y10非晶条带的脆性可能是由于Mg2Cu金属问化合物的纳米颗粒弥散分布的结果。

关键词(KeyWords)： 晶化行为;热力学与动力学;弥散分布的纳米颗粒;脆性

Abstract:

Keywords:

基金项目(Foundation): 江苏省自然科学基金(BK 2001053)资助

作者(Author): 孙国元,陈光,刘平

Email:

DOI:

参考文献(References)：

• [1] Soifer Y M , Kobelev N P , Brodova L G , et al. Internalfriclion and the Young's modulus change associated withamorphous to nanocrystalline phase transition in Mg-Ni-Yalloy[J]. Nanostructured Materials, 1999, 12: 875-878．
• [2] Ohnuma M , Pryds N H , Linderoth S, et al. Bulk amor-phous(Mg0． 98Al0． 02) 60Cu30Y10 alloy[J]. Scripta Mater, 1999,41(8) : 889-893．
• [3] Eldrup M , Schr Φ der Pedersen A, Ohnuma M, et al. Bulkamorphous alloy: preparation and properties of (Mg0． 98Al0． 02) x(Cu0． 75Y0． 25) 100-x[J]. MaterSci Forum, 2000, 343-346:123-128．
• [4] Pryds N, Eldrup M, Ohnuma M, et al. Preparation andproperties of Mg-Cu-Al-Y bulk amorphous alloys[ J] .Mater Trans JIM, 2000, 41 (11) : 1435-1442．
• [5] Audebert F, Rozenberg S, Galano M. Rapidly quenchedMg65YxCu25-xMM10(MM: Mischmetal) alloys[J]. J Non-Cryst Solids, 2001, 287:45-49．
• [6] Inoue A, Takeuchi A. Recent progress in bulk glassy alloys[J]. Mater Trans JIM, 2002, 43(8) : 1892-1906．
• [7] 张海峰,丁丙哲,胡壮麒.块状金属玻璃研究进展[J].金属学报,2001,37(11) :1132-1141．
• [8] Inoue A. High strength bulk amorphous alloys with lowcritical coolirig rates[J] . Mater Trans JIM, 1995, 36(7) :866-875．
• [9] Inoue A, ZHANG Tao, Takeuchi A. Ferrous and nonferrousbulk amorphous alloys[J]. Mater Sci Forum, 1998, 269-272: 855-864．
• [10] Inoue A, ZHANG Tao. Stabilization of supercoolcd liquiJand bulk glassy alloys in ferrous and nonferrous systemstJ].Non-Ciyst Solids , 1999 , 250-252 : 552-559．
• [11] Inoue A. Stabilization of metallic supercooled liquid and bulk amorphous alloys[J]. Acta Mater, 2000, 48:279-306．
• [12] Inoue A, Ohtera K, Kita K, et al. New amorphous Mg-Ce-Ni alloys with high strength and good ductility[J]. Jpn J Appl Phys, 1988, 27(12) : L2248-L2251．
• [13] Inoue A, Kohinata M, TASI An-pang, et al. Mg-Ni-La amorphous alloys with a wide supercooled liquid region [J]. Mater Trans JIM, 1989, 30(5) : 378-381．
• [14] Gyoo Kim S, Inoue A, Masumoto T. High mechanical strengths of Mg-Ni-Y and Mg-Cu-Y amorphous alloys with significant supercooled liquid region [J] . Mater Trans JIM, 1990, 3l(ll): 929-934．
• [15] Inoue A, Kato A, ZHANG Tao, et al. Mg-Cu-Y amorphous alloys with high mechanical strengths produced by a metallic mold casting method[J] . Mater Trans JIM, 1991, 32(7) : 609-616．
• [16] Inoue A, Nakamura T, Nishiyama N, et al. Mg-Cu-Y bulk amorphous alloys with high tensile strength produced by a high-pressure die casting method[J] . Mater Trans JIM, 1992, 33(10) : 937-945．
• [17] Busch R, Liu W, Johnson W L. Thermodynamics and kinetics of the Mg65Cu25Y10 bulk metallic glass forming liquid [J] J Appl Phys, 1998, 83(8) : 4134-4141．
• [18] Murty B S, Hono K. Forming of nanocrystalline particle in glassy matrix in melt-spun Mg-Cu-Y based alloys [J]. Mater Trans JIM, 2000, 4l(ll): 1538-1544．
• [19] Gu Kang H, Soo Park E, Tae Kim W, et al. Fabrication of bulk Mg-Cu-Ag-Y glassy alloy by squeeze casting [J]. Mater Trans JIM, 2000, 41 (7) : 846-849．
• [20] Amiya K, Inoue A. Preparation of bulk glassy M-g65Y10Cu15 Ag5Pd5alloy of Φ12 mm in diameter by water quenching[J]. Mater Trans JIM, 2001, 42(3) : 543-545．
• [21] MEN Hua, YANG Ming-chuan, XU Jian. Glass-forming ability of Mg-Cu-Co-Y alloy [J] . Mater Sci Forum, 2002, 386-388: 39-46．
• [22] Park E S, Kang H G, Kim W T, et al. The effect of Ag addition on the glass-forming ability of Mg-Cu-Y metallic glass alloys[J]. J Non-Cryst Solids, 2001, 279:154-160．
• [23] Amiya K, Inoue A. Thermal stability and mechanical properties of Mg-Y-Cu-M(M = Ag, Pd) bulk amorphous alloys[J]. Mater Trans JIM, 2000, 41 (ll): 1460-1462．
• [24] 王一禾,杨鹰善.非晶态合金[M].北京:冶金工业出版社,1984．
• [25] 郭贻诚,王震西.非晶态物理学[M].北京:科学出版社.1984．
• [26] (美国)卢博斯基F E.非晶态金属合金[M].北京:冶金工业出版社,1989．
• [27] Takeuchi A, Inoue A. Calculation of crystallization temperature of multicomponent metallic glass[J]. Mater Trans JIM, 2002, 43: 2275-2284．
• [28] Schlorke N, Weiss B, Eckert J, et al. Properties of Mg-Cu-Y glasses with nanocrystalline particles [J] . Nanos-tructured Materials, 1999