钨合金微观力学性能研究Mechanical properties of microstructure of W alloy determined by nanoindentation method
黄伟;赵宝荣;史洪刚;尚福军;
摘要(Abstract):
钨合金微观性能的测定对钨合金的研究和设计有着极其重要的意义。以往对于微观性能的测试大都采用测量同种成分的单相材料的性能来代替实际复合材料的微观性能,而其结果与实际结果则存在着很大的误差。采用纳米压痕试验的方法,在钨颗粒与基体不分离的情况下测量其微观性能,分析试验结果,解释宏观现象。分析结果表明,在钨合金材料中,基体相并不是弱相,其对强度的贡献应重新认识。
关键词(KeyWords): 钨合金;微观性能;纳米压痕
基金项目(Foundation):
作者(Author): 黄伟;赵宝荣;史洪刚;尚福军;
Email:
DOI:
参考文献(References):
- [1]高栋,袁哲俊,等.纳米尺度下材料显微硬度测试原理的研究[J].航空工艺技术,1998(4):18-20.
- [2]Randall N X,Julia-Schmutz C.Novel nanoindentation method for characterizing multiphase materials[J].Thin Solid Films,1997,(308-309):297-303.
- [3]Cheng Y T,Cheng C M.J Mater Res[Z].1998,13(4):1059.
- [4]Lucas B N,Oliver W C,Swindenman J E.Material Research[Z].Soc Symp Proc,1998,522:3.
- [5]Pollock H M,ASM Handbook[M].Ohio:ASM International,1992(18):419.
- [6]Elghazal H,Lormand G,Hamel A,et al.Mircroplasticity ch-aracteristics obtained through nano-indentation measurements:application to surface hardened steels[J].Materials Science and Engineering,2001,A303:110-119.
- [7]史洪刚,尚福军,等.钨合金微观性能测试与研究[J].哈尔滨工业大学学报,2003,9(35增刊):54.
- [8]Peng Ji Hua,Liu Dan Mei,Wang Jin Guo.显微力学探针:材料微区性能检测新手段[M].Beijinjg:CMRS,1994.
- [9]张济山,刘兴江,崔华,等.金属基复合材料相界面力学性能显微力学探针分析[J].金属学报,1997,33(5):548.
- [10]OliverWC,PharrGM.An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimemt[J].Mater Res,1992,7(6):1564.