复合材料层合板弹击性能数值研究Numerical simutation of the bullet resistant ability of composite laminate
陈炎;孙秦;
摘要(Abstract):
针对纤维增强复合材料层合板不同弹击速度条件下的弹击特性问题,基于大型有限元软件LS-DYNA3D,建立了一套适用于不同铺层顺序、铺向角以及不同弹击速度的数值模拟方案,对纤维增强复合材料铺向角、铺层顺序对其弹击性能的影响作用进行了数值分析研究。结果表明,增加长纤维的使用比例,可有效提高结构的吸能及抗弹击特性,且在低速弹击条件下铺向角与铺层顺序对弹击性能有明显作用,而在高速条件下几乎无影响。
关键词(KeyWords): 纤维增强复合材料;数值模拟;弹击特性;层合板;LS-DYNA3D
基金项目(Foundation):
作者(Author): 陈炎;孙秦;
Email:
DOI: 10.14024/j.cnki.1004-244x.2011.01.004
参考文献(References):
- [1]王晓强,朱锡,梅志远.纤维增强复合材料抗侵彻研究综述[J].玻璃钢/复合材料,2008(5):47-56.
- [2]梅志远,朱锡,刘燕红,等.纤维增强复合材料层合板弹道冲击研究进展[J].力学进展,2003,33(3):375-388.
- [3]罗军,汤瑞峰,易文俊.层合纤维增强复合材料的抗弹性能数值计算研究[J].弹道学报,2003,15(2):49-54.
- [4]董卫卫,黄故.玻璃纤维/不饱和聚酯复合材料板材的耐冲击性能研究[J].天津工业大学学报,2008,27(1):23-26.
- [5]Hitchen S A,Kemp R M J.The Effect of stacking sequence onimpact damage in a carbon fibre/epoxy composite[J].Com-posites,1995,26:207-214.
- [6]Fuossa E,Straznickya P V,Cheung P.Effects of stackingsequence on the impact resistance in composite laminates-part1:parametric study[J].Composite Structures,1998,41:67-77.
- [7]Chan S,Fawaz Z,Behdinan K,et al.Ballistic limit predictionusing a numerical model with progressive damage capability[J].Composite Structures,2007,77:466-474.
- [8]Zhao G,Cho C,Lu S,et al.Experimental study on impact re-sistance properties of T300/Epoxy composite laminates[J].Journal of Composite Materials,2009,44(7):857-870.
- [9]LS-DYNA Theory Manual.Version 971[M].Livermore Soft-ware Tech Corp,2006.
- [10]LS-DYNA Keyword User’s Manual VolumeⅡ(MaterialModels,References and Appendices).Version 971[J].Livermore Software Tech Corp,2007.
- [11]Huang J,Wang X.Numerical and experimental investigationson the axial crushing response of composite tubes[J].Com-posite Structures,2009,91:222-228.
- [12]陈晓,周宏.层叠靶板弹击实验及弹道侵彻机理的数值模拟研究[J].爆炸与冲击,2003,23(6):509-515.