邬胜伟;曾效舒;黄民富;魏嘉麒;

• 1:南昌大学机电工程学院
• 2:江西铜业集团江西铜业公司余干铸锻有限公司

摘要(Abstract)：

采用X-Y函数记录仪(LM20A-200型),测定30#机油及油基-碳纳米管(CNTs)纳米流体淬火液冷却特性曲线。研究CNT含量的变化对油基-CNT纳米流体淬火液冷却特性曲线及45#钢硬度的影响。结果表明:随着CNTs含量的增加,纳米流体的冷却能力逐渐增大;采用质量分数为1.5%的油基-碳纳米管纳米流体淬火液和30#机油分别对45#钢进行淬火处理,经油基-碳纳米管纳米流体淬火液淬火后45#钢的硬度有所提高。

关键词(KeyWords)： 油基-碳纳米管纳米流体淬火液;含量;冷却特性曲线;45#钢

Abstract:

Keywords:

基金项目(Foundation): 江西省科技厅公关项目(z02727);; 南昌大学分析测试中心测试基金项目(201203)

作者(Author): 邬胜伟;曾效舒;黄民富;魏嘉麒;

Email:

DOI: 10.14024/j.cnki.1004-244x.2014.05.065

参考文献(References)：

• [1]李书常.热处理实用淬火介质精选[M].北京:化学工业出版社,2009:108-110.
• [2]胡光立,谢希文.钢的热处理:原理和工艺[M].西安:西北工业大学出版社,2004,9:167-201.
• [3]李晓宇,马勤.新型淬火介质的应用[J].热加工工艺,2010,22:158-161.
• [4]温新林,王秀梅,张大庆,等.水溶性淬火介质在现代热处理中的应用[J].热加工工艺,2007,36(6):63-65.
• [5]胡绍文,李卫明,刘麦秋.水溶性淬火介质[J].热加工工艺,2006,35(16):75-77.
• [6]王禄春,宋锴.关于水溶性聚合物淬火介质推广应用的思考[J].热加工工艺,2006,35(1):66-68.
• [7]Eastman J A,Phillpot S R,Choi S U S,et al.Thermal transport innanofluids 1[J].AnnuRev Mater Res,2004,34:219-246.
• [8]Kaka?S,Pramuanjaroenkij A.Review of convective heat transfer enhancement with nanofluids[J].International Journal of HeatandMass Transfer,2009,52(13):3187-3196.
• [9]Duursma G,Sefiane K,Kennedy A.Experimental studies of nanofluid droplets in spray cooling[J].Heat Transfer Engineering,2009,30(13):1108-1120.
• [10]Choi S U S.Nanofluids:from vision to reality through research[J].Journalof HeatTransfer,2009,131(3):103-112.
• [11]Park K J,Jung D.Enhancement of nucleate boiling heat transfer using carbon nanotubes[J].International Journal of Heat andMass Transfer,2007,50(21):4499-4502.
• [12]Ding Y,Alias H,Wen D,et al.Heat transfer of aqueous suspensions of carbon nanotubes(CNT nanofluids)[J].International Journal of Heat and Mass Transfer,2006,49(1):240-250.
• [13]Xie H,Lee H,Youn W,et al.Nanofluids containing multiwalled carbon nanotubes and their enhanced thermal conductivities[J].Journal of Applied Physics,2003,94(8):4967-4971.
• [14]Keblinski P,Phillpot S R,Choi S U S,et al.Mechanisms of heat flow in suspensions of nano-sized particles(nanofluids)[J].International Journal of Heat and Mass Transfer,2002,45(4):855-863.
• [15]Putra N,Thiesen P,Roetzel W.Temperature dependence of thermal conductivity enhancement for nanofluids[J].Journal ofHeatTransfer,2003,125:567-574.
• [16]Chopkar M,Sudarshan S,Das P K,et al.Effect of particle size on thermal conductivity of nanofluid[J].Metallurgical and MaterialsTransactionsA,2008,39(7):1535-1542.
• [17]Liu M S,Ching-Cheng Lin M,Huang I T,et al.Enhancement of thermal conductivity with carbon nanotube for nanofluids[J].International Communications in Heat and Mass Transfer,2005,32(9):1202-1210.
• [18]Amrollahi A,Hamidi A A,Rashidi A M.The effects of temperature,volume fraction and vibration time on the thermophysical properties of a carbon nanotube suspension(carbon nanofluid)[J].Nanotechnology,2008,19(31):315701.