机械合金化制备表面涂层的力学响应机制数值模拟Simulation of mechanical response mechanism of coatings prepared by mechanical alloying process
丁润东;沈以赴;李博;胡永志;郭燕;
摘要(Abstract):
以机械合金化法制备金属表面功能涂层这一新型工艺为主要实验背景,通过有限元数值模拟研究在球磨制备涂层的过程中,涂层与基体的界面形貌形成及演变过程,讨论不同工艺参数对界面形貌的影响,进而分析球磨的工艺参数对涂层的制备效果、涂层与基体结合性能的影响。研究不同的球磨参数下,基体材料的残余应力分布和等效塑性应变分布,分析其对基体材料力学性能的影响,并且对该力学响应过程中的热效应进行了数值分析。
关键词(KeyWords): 机械合金化;涂层;有限元;界面;力学性能
基金项目(Foundation): 国家自然科学基金项目资助(51075205)
作者(Author): 丁润东;沈以赴;李博;胡永志;郭燕;
Email:
DOI: 10.14024/j.cnki.1004-244x.2011.05.018
参考文献(References):
- [1]Suryanarayana C.Mechanical alloying and milling[J].Prog ress in Materials Science,2001,46(1/2):1-184.
- [2]Romankov S,Hayasaka Y,Shchetinin I V,et al.Investigationof structural formation of Al SiC surface composite under ballcollisions[J].Materials Science and Engineering:A,2011,528(9):3455-3462.
- [3]Zadorozhnyy V,Kaloshkin S,Kaevitser E,et al.Coating of met als with intermetallics by mechanical alloying[J].Journal ofAlloys and Compounds,2011,509:S507-S509.
- [4]Romankov S,Komarov S V,Vdovichenko E,et al.Fabricationof TiN coatings using mechanical milling techniques[J].Int JRefract Met Hard Mater,2009,27(2):492-497.
- [5]Révészá,Takacs L.Coating metals by surface mechanical at trition treatment[J].Journal of Alloys and Compounds,2007,441(1/2):111-114.
- [6]Révészá,Takacs L.Coating a Cu plate with a Zr Ti powdermixture using surface mechanical attrition treatment[J].Sur face and Coatings Technology,2009,203(20/21):3026-3031.
- [7]黄真,沈以赴,朱永兵,等.低碳钢表面Cr合金层的低温高能球磨制备[J].兵器材料科学与工程,2008,31(2):54-57.
- [8]Gu D,Shen Y.Microstructures and properties of high Cr con tent coatings on inner surfaces of carbon steel tubular compo nents prepared by a novel mechanical alloying method[J].Ap plied Surface Science,2009,256(1):223-230.
- [9]孙斌斌,李玉芳,顾冬冬.机械球磨法制备TiC/Al复合涂层的显微组织及力学性能[J].兵器材料科学与工程,2010,33(1):81-84.
- [10]Chattopadhyay P,Manna I,Talapatra S,et al.A mathematicalanalysis of milling mechanics in a planetary ball mil[l J].Ma terials Chemistry and Physics,2001,68(1/3):85-94.
- [11]Meyers M A.Dynamic behavior of materials[M].Wiley Inter science,1994:299-300.
- [12]Meyer H W.Modeling the high strain rate behavior of titani um undergoing ballistic impact and penetration[J].Interna tional Journal of Impact Engineering,2001,26(1/10):509-521.
- [13]Dai K,Shaw L.Comparison between shot peening and surfacenanocrystallization and hardening processes[J].Materials Sci ence and Engineering:A,2007,463(1/2):46-53.