何春年,赵乃勤

• 1:天津大学材料科学与工程学院
• 2:天津大学材料科学与工程学院 天津300072
• 3:天津300072

摘要(Abstract)：

综述了纳米相增强铝基复合材料制备技术的国内外研究现状,对原位反应合成法、快速凝固工艺、大塑性变形法、高能球磨法、溅射法、溶胶-凝胶法6大类制备工艺方法的机理、特点、适用范围和现阶段开发程度,以及由这些制备工艺所开发出的新材料的优异的力学、物理、化学性能进行了分析,并综合评价了各种工艺方法的优缺点。在指出纳米相增强铝基复合材料制备技术应用现状的基础上,探讨了制备技术未来的发展趋势。

关键词(KeyWords)： 纳米;铝基复合材料;制备技术

Abstract:

Keywords:

基金项目(Foundation):

作者(Author): 何春年,赵乃勤

Email:

DOI: 10.14024/j.cnki.1004-244x.2005.03.021

参考文献(References)：

• [1]王庆平,等.反应生成金属基复合材料制备方法的研究进 展[J].江苏大学学报,2003,24(3):57-61.
• [2]桂满昌,等.颗粒增强铝基复合材料的研究开发与应用[J]. 江苏科技信息,2002(3):22-24.
• [3]陈秋玲,等.颗粒增强铝基复合材料的研究[J].中国资源 综合利用,2003(6):31-33.
• [4]钟历,等.纤维增强铝基复合材料研究进展[J].机械工程 材料,2002,26(12):12-14.
• [5]张召,李宗全.纳米复合材料力学性能的研究[J].材料科 学与工程,2001,19(4):122-126.
• [6]丛洪涛,等.单壁碳纳米管／纳米铝基复合材料的增强效果 [J].材料研究学报,2003,17(2):132-137.
• [7] Wang Hongzhi. The influence of SiC particle size on microstruc-ture and mechanical properties of Al2O3 - SiC nanocomposite [J]. Journal of Advanced Materials, 2000(1): 60 - 63.
• [8] Zhong R, Cong H T, Cheng H M, et al. Synthesis of SWNTs/ nano - Al composite[J]. Chinese Journal of Materials research, 2002,16(4):342.
• [9] Zhong R, Cong H T, Liu C. Fabrication of single - walled carbon nanotubes from multi - walled carbon nanotubes and carbon fibers [J]. Carbon, 2002, 40 (15): 29 - 70.
• [10]董晟全,等.纳米AlN颗粒增强铝基复合材料的制备与力 学性能研究[J].热加工工艺,2002(3):43-44.
• [11] Ying D Y,Zhang D L. Processing of Cu - Al2O3 metal matrix nanocomposite materials by using high energy ball milling[J]. Mater Sci Eng, 2000, A286(1): 152 - 156.
• [12] Jena PK, Brocchi E A, Motta M S. In - situ formation of Cu- Al2O3 nano - scale composites by chemical routes and studies on their microstructures[J]. Mater Sci and Eng, 2001, A313:180 - 186.
• [13] Zhu S J. Iizuka T. Fabrication and mechanical behavior of Al matrix composites reinforced with porous ceramic of in situ grown whisker framework[J]. Mater Sei and Eng, 2003, A354: 306-314.
• [14] Nagarajan R, Chattopadhyay K. Intermetallic Ti2-Ni/TiNi nanocomposite by rapid solidification[J]. Acta Metall Mater, 1994, 42(3): 947-958.
• [15] Kim Y H,Inoue A,Masumoto T. Ultrahigh tensile strengths of A188Y2Ni9M(M = Mn or Fe) amorphous alloys containing finely dispersed fcc- Al particles[J]. Mater Trans JIM, 1990, 31:747-749.
• [16] Chen H, He Y, Shiflet G J, et al. Mechanical properties of partilly crystallized aluminum based metallic glasses[J]. J Scripta Metall Mater, 1991, 25(6): 1421 - 1424.
• [17]仝兴存,方鸿生,柳百成.快速凝固Al-TiC自生复合材料 的显微组织和力学性能[J].金属学报,1996,32(10):1111- 1115.
• [18] Valiev R Z, Islamgaliev R K, Alexandrov I V. Bu - lk nanos-tructured materials from severe plastic deformation [J]. Prog Mater Sci, 2000,45(2):103 - 189.
• [19] Alexandrov I V, Zhu Y T, Lowe T C, et al. Microstrctures and properties of nanocomposites obtained through SPTS consolidation of powders[J] . Metall Mat Trans A, 1998, 29A(9): 2253-2260.
• [20]骆心怡,朱正吼,卢翔,等.高能球磨制备纳米CeO2／Al复 合粉末[J].热加工工艺,2003(2):14-16.
• [21] Woo K D, Zhang D L. Fabrication of Al - 7wt% Si - 0. 4wt% Mg/SiC nanocomposite powders and bulk nanocomposites by high energy ball milling and powder metallurgy [J]. Current Applied Physics, 2004(4): 175 - 178.
• [22] Goujon C, Goeuriot P. Influence of the content of ceramic phase on the precipitation hardening of Al alloy 7000/A1N nanocomposites[J]. Mater Sci and Eng, 2003, A356:399-404.
• [23] Zeman P, Cerstvy R, Mayrhofer P H, et al. Structure and properties of hard and superhard Zr - Cu - N nanocomposite coatings[J]. Mater Sci and Eng, 2000, A289:189 - 197.
• [24] Laha T, Agarual A, Mckechnie Tim, et al. Synthesis and characterization of plasma spray formed carbon nanotube reinforced aluminum composite[J]. Mater Sci and Eng, 2004,A381: 249-258.
• [25]张姝,等.纳米材料制备技术及其研究进展[J].四川师范 大学学报,2001,24(5):516-519.
• [26] Park J H, Lee M K, Rhee C K, et al. Control of hydrolytic reaction of aluminum particles for aluminum oxide nanofibers [J]. Mater Sci and Eng, 2004, A375 - 377: 1263 - 1268.
• [27]唐浩林,等.溶胶凝胶法制备α-Al2O3纳米材料团聚控制 研究新进展[J].材料导报,2002,16(9):44-45.
• [28] Bhattacharyya A, Chakraborti P C, et al. Preparation of alumina - silica - nickel nanocomposite by in situ reduction through sol - gel route[J] . Science and Technology of Advanced Materials, 2001(2):449-454.
• [29]李顺林,等.金属基纳米复合材料的制备技术研究[J].南 京航空航天大学学报,2003,35(5):572-578.