等离子体电弧数值模拟的研究进展Progress in numerical simulation of the plasma arc
殷凤良;胡绳荪;高忠林;赵立志;
摘要(Abstract)：
等离子体电弧的数值模拟研究对其在工业中的应用有重要的意义。详细阐述等离子体电弧数值模拟研究的发展过程,分别包括自由等离子体电弧和约束等离子体电弧的研究进展,等离子体电弧数学模型的完善主要体现在假设条件的减少上;介绍等离子体电弧数值模拟的方法与步骤,并指出ANSYS、FLUENT等数值分析软件都可以求解等离子体电弧数学模型;还提出综合考虑等离子体电弧的流动状态和三维约束等离子体电弧的数值模拟研究是未来的研究方向。
关键词(KeyWords)： 等离子体电弧;数值模拟;综述;软件;流动状态
基金项目(Foundation): 国家自然科学基金资助项目(50275106)
作者(Author): 殷凤良;胡绳荪;高忠林;赵立志;
Email:
DOI:
参考文献(References)：
- [1]金佑民,樊友三.低温等离子体物理基础[M].北京:清华大学出版社,1981:1-5.
- [2]过增元,赵文华.电弧和热等离子体[M].北京:科学出版社,1986:1-33.
- [3]Ramakrishnan S,Stokes A D,Lowke J J.An approximate model for high-current free-burning arcs[J].Journal of Physics D[Applied Physics],1978,11[16]:2267-2280.
- [4]Hsu K C,Etemadi K,Pfender E.Study of the free-burning high-intensity argon arc[J].Journal of Applied Physics,1983,54[3]:1293-1299.
- [5]Hsu K C,Pfender E.Two-temperature modeling of the free-burning,high-intensity arc[J].Journal of Applied Physics,1983,54[[8]]:4359-4366.
- [6]TSAI M C,KOU SINDO.Heat transfer and fluid flow in weld-ing arcs produced by sharpened and flat electrodes[J].Inter-national Journal of Heat and Mass Transfer,Journal of Applied Physics,1990,33[10]:2089-2098.
- [7]Choo T C,Szekely J,Westhoff R C.On the calculation of the free surface temperature of gas-tungsten-arc weld pools from first principles::Part I.modeling the welding arc[J].Metallur-gical Transactions B,1992,23B[6]:357-369.
- [8]Kovitya P,Schmidt H P.Theory of free-burning arc columns including the influence of the cathode[J].Journal of Physics D:Applied Physics,1992,25[11]:1600-1606.
- [9]Wu C S,Ushio M,Tanaka M.Analysis of the TIG welding arc behavior[J].Computational Materials Science,1997,7[3]:308-314.
- [10]樊丁,牛尾诚夫,陈剑虹.TIG电弧传热传质过程的数值模拟分析[J].机械工程学报,1998,34[2]:39-45.
- [11]芦凤桂,姚舜,张毓新,等.TIG焊接电弧等离子体流场的有限元分析[J].焊接技术,2004,33[2]:14-16.
- [12]McKelliget J,Szekely J,Vardelle M,et al.Temperature and velocity fields in a gas stream exiting a plasma torch::A mathematical model and its experimental verification[J].Plasma Chemistry and Plasma Processing,1982,2[3]:317-332.
- [13]Chang C H,Ramshaw J D.Numerical simulations of argon plasma jets flowing into cold air[J].Plasma Chemistry and Plasma Processing,1993,13[2]:189-209.
- [14]Huang P C,Heberlein J,Pfender E.Two-fluid model of tur-bulence for a thermal plasma jet[J].Plasma Chemistry and Plasma Processing,1995,15[1]:25-46.
- [15]Paik Seungho,Huang P C,Heberlein J,et al.Determination of the arc-root position in a dc plasma torch[J].Plasma Chemistry and Plasma Processing,1993,13[3]:379-397.
- [16]Westhoff R,Szekely J.A model of fluid,heat flow,and electromagnetic phenomena in a nontransferred arc plasma torch[J].Journal of Applied Physics,1991,70[7]:3455-3466.
- [17]韩鹏.直流电弧等离子体发生器与射流特性的数值模拟及实验研究[D].北京:清华大学,1999:35-70.
- [18]张文宏.层流等离子体射流的产生及其某些特性的研究[D].北京:中国科学院力学研究所,2000:42-59.
- [19]McKelliget J,Szekely J.Heat transfer and fluid flow in the welding arc[J].Metallurgical Transactions A,1986,17[7]:1139-1148.
- [20]Masao Ushio,Fukuhisa Matsuda.Mathematical modeling of heat transfer of welding arc[J].Transactions of JWRI,1982,11[1]:7-15.
- [21]Bauchire J M,Gonzalez J J,Gleizes A.Modeling of a DC plasma torch in laminar and turbulent flow[J].Plasma Chemistry and Plasma Processing,1997,17[4]:409-432.
- [22]Gonzalez J J,Freton P,Gleizes A.Comparisons between two-and three-dimensional models:gas injection and arc attach-ment[J].Journal of Physics D[Applied Physics],2002,35[24]:3181-3191.
- [23]Blais A,Proulx P,Boulos M I.Three-dimensional numerical modelling of a magnetically deflected dc transferred arc in argon[J].Journal of Physics D:Applied Physics,2003,36[5]:488-496.