液态搅拌铸造SiC_p/ZL101复合材料研究STUDY ON SiC PARTICULATE REINFORCED ZL101 ALUMINUM COMPOSITE
李建平,董晟全,赵玉厚,汤谨
摘要(Abstract):
利用改进的机械搅拌法在液态下将氧化态SiC_p分散进ZL101合金液中,制备了SiC_p/ZL101复合材料。对该复合材料的复合工艺、组织和常规力学性能进行了研究。结果表明,SiC_p/ZL101复合材料中SiC_p分布均匀,与基体结合良好,SiC_p与基体界面上存在Mg和Si的富集。与基体合金相比,SiC_p/ZL101的硬度、抗拉强度和耐磨性,尤其是重载下的耐磨性显著提高,塑性虽然降低,但通过优化工艺可以使之降低得最少。
关键词(KeyWords): 金属基复合材料;液态搅拌铸造;SiC颗粒增强;铝合金;组织与性能
基金项目(Foundation): 机电部教育司;; 兵器工业总公司资助项目
作者(Author): 李建平,董晟全,赵玉厚,汤谨
Email:
DOI: 10.14024/j.cnki.1004-244x.1993.02.006
参考文献(References):
- 1 Lloyd D J et al., Microstructural aspects of aluminum-silicon carbide particulate composites produced by a casting method. Mater Sci Eng, 1989. A107: 73~80.
- 2 Schuster D M et al. Production and semi-fabrication of an aluminum composite material. Light Metal Age, 1989, (2) : 15~19.
- 3 李建平,惠增哲,杨觉民.铸造SiC颗粒增强铝基复合材料研究.西安工业学院学报,1990,10(1) :61.
- 4 李建平,赵玉厚,董晟全等.SiC颗粒增强ZL101复合材料的显微组织.西安工业学院学报,1993,13(1) ,(正印刷).
- 5 董晟全,李建平,赵玉厚等,铸造SiC_p/ZL101耐磨性研究,铸造技术,1993,(1) ,(正在排印).
- 6 Ribes H et al. Microscopic examination of the interface region in 6061-Al/SiC composites reinforced with As-received and oxidized SiC particles. Metall Trans, 1990, 21A (9) : 2489~2496.
- 7 Miller W S and Humphreys F J. Foundamental relationships between mierostructure and mechanical properties of MMCs. Ed Liaw P K and Gungor M. TMS, 1990, P517.
- 8 Banerji A et al. Cast aluminum alloys containing dispersions of zircon particles. Metall Trans, 1983, 14B (6) : 273~283.